Please Scroll the Page for Details

Saturday, March 13, 2010  -  10:30 AM     Open 9 AM

Seller:  E & N Hoisting Services, Inc.
 

Location: 

100 North Rose St.

Mt. Clemens, MI  48043

                 Map                                            More Photos

 

Directions:

Take Groesbeck Hwy.  to the 1st. street north of Cass Ave., Hubbard St., then East 1 block to the corner of Hubbard and N. Rose St.

 

2 - Aluminum Quonset Huts each measuring 16'W X 45' L X 16' H.  Clean and like new.

E & N HOISTING

This sale offers some real first class equipment. Everything is clean, neat and well maintained. All equipment stored inside. E & N is liquidating their equipment, tools and office.

Check below for complete listing of the equipment with details.

Terms: 10% Buyer's Premium. All purchases must be paid for day of sale. Cash or Credit Card. Personal and Business Checks require Letter of Guarantee from the Bank drawn on with proper identification.

Inspection: Friday, March 12, 2010 from 8 A.M. to 5 P.M. and on sale day beginning at 8 A.M.
 

TRUCKS AND EQUIPMENT LIST
(#3)
2000 Linkbelt: Model HTC 8640HL Heavy Package; VIN #F8JO-3972HTCF3125HL
Engine: Cummins ISL 330, 8.9 L; Transmission: Allison Automatic, MD 3066, Serial #6510256544; Hours: 12,500; Mileage: 126,995; Driver’s Cab = A/C, Air Ride Seat, Cruise Control; Front Spring Suspension, Rear is Air Ride.

Crane: 40 Ton; 105 ft. boom; 360 degree radius continuous w/lock; Jib = (2) 28 ft. swing around, total 51 ft. making total tip height 162 ft., 120 ft. reach from pin; 5/8 inch cable non-spin can be 6 part w/2 block system has extra quick shiv block; 2 speed winch; Total rig length is 45 ft.; Outriggers located front, center, rear, controlled from driver cab, crane cab or two positions outside; Computer controlled, swivel stick controls, drive rig capable from crane cab; Crane Cab is heated and air conditioned, wipers on all glass; Tool boxes on both sides of truck and box on crane.

This rig is in very good condition, very clean and has been well maintained.

(#2)
2002 Sterling w/Manitex Boom
Truck: VIN #2FZHATAK62AH62313; Engine: 3126 Cat; Transmission: 9 spd. Road Ranger; Hours: 7068; Mileage: 83,636; Tandem Axle; Air Conditioned w/Air Ride Seat.

Crane: 28 Ton Manitex; Serial #78653; 92 ft. boom; 360 degree radius continuous; Jib = 26 ft. w/slide out totaling 44 ft., Jib is offset; 9/16 inch cable non-spin; 1 shiv block up to 3 part; 2 speed winch; 2 speed boom; 16 ft. bed; X pattern Outriggers; Enclosed Cab w/heat; Tool boxes on each side.

A very clean well maintained piece of equipment……

(#7)
2001 Sterling w/Manitex Boom
Truck: VIN #2FZHATAK71AH62237; Engine: 3126 Cat; Transmission: 9 spd. Road Ranger; Hours: 6821; Mileage: 69,285; Tandem Axle; Air Conditioned w/Air Ride Seat; Newer Tires.

Crane: 28 Ton Manitex; Serial #70173; 92 ft. boom; 360 degree radius continuous; Jib = 26 ft. w/slide out totaling 44 ft., Jib is offset; 9/16 inch cable non-spin; 1 shiv block up to 3 part; 2 speed winch; 2 speed boom; 16 ft. bed; X pattern Outriggers; Enclosed Cab w/heat; Tool boxes on each side.

(#4)
2000 Sterling w/Pioneer Boom
Truck: VIN #2FZXEWB7YAH30197; Engine: C-12 Cat; Transmission: 8 spd. Road Ranger, 8LL; Hours: 10,963; Mileage: 131,607; Tandem Axle; Air Conditioned, Air Seat, Cloth interior, Tilt Steering, Cruise Control, Power Windows, Trailer Supply Brake.

Crane: 28 Ton Pioneer; Serial #48488; 92 ft. boom; 360 degree radius continuous; Jib = 28 ft. w/slide out totaling 51 ft.; 9/16 inch cable non-spin; 2 spd winch; 16 ft. bed; X pattern Outriggers, Enclosed Cab w/heat; Heydenrich Suspension; Tool Boxes.

(#13)
1999 Freightliner w/Pioneer Boom
Truck: VIN #1FVXTECB4XHA32498; Engine: C-10 Cat; Transmission: 9 spd. Rockwell RM RMX; Hours: 15,757; Mileage: 188,241; Tandem Axle; Air Conditioned, Air Seat, Cruise Control.

Crane: 28 Ton Manitex; Serial #78653; 92 ft. boom; 360 degree radius continuous; Jib = 26 ft. w/slide out totaling 44 ft., Jib is offset; 9/16 inch cable non-spin; 1 shiv block up to 3 part; 2 speed winch; 2 speed boom; 16 ft. bed; X pattern Outriggers; Enclosed Cab w/heat; Tool boxes on each side, one on Turret.

(#11)
1985 GMC w/RO Stinger Boom
Truck: VIN #1GDM7DY9FV62420; Engine: 3208 Cat V-8, Naturally Aspirated, replaced at 249,252 Miles; Transmission: Allison Automatic; Hours: 2395 (may not be correct); Mileage: 295,742; Single Axle.

Crane: 11 Ton RO Stinger; Serial #5007856; 63 ft. boom; Mirror to Mirror Radius; Jib = 23 ft. w/slider totaling 37 ft.; ½ inch cable non-spin; 2 spd. winch; Outriggers swing out on front, straight down at rear; Two station Control, stand up, cab on driver’s side is heated; Two tool boxes on driver’s side front and rear.

Although an older truck this piece of equipment is in very good condition. Cab, fenders, etc. are rust free…

(#12)
1987 Ford w/RO Stinger Boom
Truck: VIN #1FDYT90A8HVA40554; Engine: 7.8 Ford Diesel, replaced at 202,482 Miles: Transmission: 13 spd., Air Split, Road Ranger RT 6613, low, intermediate, direct; Hours: N/A; Mileage: 399,375; Tandem Axle.

Crane: 14 Ton RO Stinger; Serial #0107870; 73 ft. boom; Mirror to Mirror Radius; Jib = 23 ft w/slider totaling 37 ft; ½ inch cable non-spin; Outriggers swing out on front, straight down at rear; Two station Control, stand up, cab on driver’s side is heated; One tool box on each side.

 
(#5)
1998 Ford w/National Boom
Truck: VIN #1FDY586F6WVA36113; Engine: 3126 Cat; Transmission: 9 spd. Road Ranger; Hours: 3,354; Mileage: 25,177; Tandem Axle.

Crane: 17 Ton National; Serial #29275; 81 ft. boom; Mirror to Mirror Radius; Jib = 24 ft. w/slider totaling 43 ft.; 9/16 inch cable non-spin; 2 spd. winch; 18 ft. bed length; Outriggers front and rear; 3 tool boxes


(#9)
1991 Ford Stake Truck L8000
VIN #1FDYY82A5MVA05263; Engine: 7.8 L, Ford Diesel; Transmission: 7 spd. Road Ranger; Mileage: 282,593; Tandem Axle; 22 ft. 3 inch steel bed with side and rear racks, liftgate; Tool Boxes on both sides, newer tires.

(#1)
1995 Ford Semi-Tractor
L9000 Aero Max; VIN #1FTYY95UXSVA60353; Engine: N-14 Cummins – Electronic; Transmission: 10 spd. Road Ranger; Mileage: 313,515; Tandem Axle, Air Ride; Driver’s Seat Air Ride, Cruise, Air Conditioned, Tilt Steering.

(#20)
2003 Ford Utility Truck
F-450 XL Super Duty; VIN #1FDXF46P13ED85547; Engine: Power Stroke V-8 6.0 Diesel Turbo w/dual batteries; Transmission: Auto/Overdrive w/Tow Haul; Mileage: 95,387; Air Conditioned, Cruise Control

11 ft. Utility Box: Loads of storage and compartments, 13 horse Kohler Compressor starts off truck battery, Blue Star 6000 Welder/Generator, Set-up for Torches and Tanks, Hose Reels, 50 ft. of ½ inch hose with extra 25 ft., Bolt Bins, Work Light on reel, Exterior Lights. This truck is very clean and well maintained and has always been garaged.

1990 Transtech Trailer
VIN #1T9E50309L1114218; Drop Deck, Tandem Axle, 11 ft. on top, 39 ft. on bottom, spreadable in 3 ft. increments to total of 70 ft., good brakes and tires.

1974 Fontaine
VIN #23275; Flat Bed, Tandem Axle, good tires and brakes.

1966 Allis Chalmers HI-LO
Serial #47918000; Model #PP60-24-2-PS; 6 cyl. Engine L.P. gas; Hours: 3123; 6,000 lbs. capacity, Long Forks, side shift.

1985 Clark Lift Truck
Serial #YG85-137-5960; Model #C500YS80; 6 cyl. Engine L.P.gas; Hi / Low Transmission; Hours: 4772; Mast = Cascade Rotator; 6,000 lbs., side shift.Kubota Tractor
L2850, 4 wheel drive, enclosed cab w/heat; Hours: 1239; Transmission: Glide Shift; Diesel Engine, 3 point hitch, wet lines.

Attachments: 6 ft. push blade, Hydraulic Broom.

 

2 - Aluminum Quonset Huts each measuring 16'W X 45' L X 16' H.  Clean and like new.

EQUIPMENT – TOOLS – PARTS – MISCELLANEOUS

Basket for 28 Ton Crane
Man Basket for 17 Ton Crane
Universal Basket
Spreader Bar for Trusses
Miscellaneous Spreader Bars, various lengths
9/16 inch non-spin cable
Fork System for Crane, 2000 lbs.
Quantity of LP Gas Tanks, Forklift
Various Tarps and Canvas
Chains / Cables / Pulleys / Belts / Tie Downs / Misc. Parts
Platform Scale
Barrel Pumps
Husquvara Chain Saw
Weed Whip
(2) Graco Power Greasers
(2) Graco Power Oilers
Bin of O-Ring Fittings for Hoses
Enco Drill Press
Bolt Cabinets
Metal Bench
Cabinets
Carolina 60,000 lb. Shop Press
Parts Washer
IMS Power Hacksaw
Set of Torches / Gauges / Cart
Lincoln Power Mig, Model 255 Welder, Steel or Aluminum
10 H.P. Commercial Air Compressor
Craftsman 8 inch Bench Grinder
Chop Saw
Clean Burn Used / Waste Oil Heater / Furnace
Karcher Commercial Steam Cleaner – Gas
Quantity of Tires; New & Used
Quantity of Rims
Quantity of Jack Stands
Quantity of Transmission Stands/Jacks
Quantity of Floor Jacks
Quantity of Material Carts
Tennant Floor Sweeper
Several Pallet Jacks
Engine Stands
Cherry Picker – Engine
Cardinal Model 205 Electronic Scale
(3) 275 gallon oil tanks
 

OFFICE FURNITURE / EQUIPMENT
Office / Desk Chairs
Desks
Credenzas
Chairs / Tables / File Cabinets: 2 drawer – 3 drawer – Lateral Sizes / Standard File Cabinets
Computer Systems
Telephone Systems


TERMS & CONDITIONS:  

10% buyer's premium.  Personal or Company Checks require a Bank Letter of Credit guaranteeing payment for purchase on sale day.   All purchases must be paid for on day of sale. Everything Sold in "AS-IS" condition.